產能與手感的提升
1. 入布喂布輪以特殊優力膠製作可避免與布架過度摩擦產生摺痕。
2. 入布架使用電木輪與入布優力膠輪配合入布更平順。
3. 以適量的風量與熱量達到最佳使用效果避免過量或不及。
4. 風管特殊結構能使由噴嘴出來風速平均。
5. 出布使用帆布帶配合變速機構易調整，不會有刮傷、損傷現象。
6. 入出布使用變頻器控制；使用旋鈕調整速度配合易懂?dāng)?shù)字顯示，可以很容易達到
所要縮率與定型效果。
7. 熱風溫度控制系統，配合本機循環系統與適量風量＆熱量使控制保持穩定。
Production Increasing
1. Overfeeding roller made by special rubber which can void the friction and waffle effect by
the frames.
2. The frame use the bakelite roll and P.U. roll make the fabrics sofety and smoothly entering
the heating chamber.
3. Accurate air speed and heat temperature to produce better result in machine proformance.
4. The hot air nozzles is based on aero-dynamices dasign to elaborated that uniform hot air on
the both surfaces of fabric with uniform temperature.
5. The outlet portion is equiped convas belt with gear motor.
6. The speed adjustment is by inverter which is easy for shrinkage control.
7. The them control system work with accurate air speed in safety and temperature stable. |
智紡.png)
